Batteries:
- Your OneTouch Verio® Meter uses two AAA alkaline batteries.
- For more information on when to change the meter batteries, see articles:
- If the meter does not turn on, check the batteries.
- IMPORTANT: Use only AAA alkaline batteries with your meter. Do Not use rechargeable batteries. Use of an incorrect battery type or the replacement of only one battery may result in your meter providing fewer tests than normal.
- WARNING: Certain batteries may cause leaking which can damage the meter or cause the batteries to lose power sooner than normal. Replace leaking batteries immediately.
Replacing The Batteries:
1. Remove the old batteries
- Start with the meter turned off.
- Remove the battery cover by sliding it downward.
- Pull up on the battery ribbon to lift both batteries out of the compartment.
- Do Not remove the batteries while the meter is connected to a computer.
2. Insert the new batteries
- Insert two AAA alkaline batteries on top of the battery ribbon. Plus (+) and minus (–) signs will guide you in placing the batteries.
- If the meter does not power on after you have replaced the meter batteries, check that the batteries are correctly installed.
- If the meter still does not power on, contact OneTouch® Customer Care.
3. Check your meter settings
- Removing the meter batteries will not affect your stored results. However, you may need to check your meter settings.
4. Dispose of batteries
- Dispose of batteries according to your local environmental regulations.
