Instructions for setting up the OneTouch Ultra Plus Flex™ meter including how to turn the meter on and first time setup steps such as setting the time and date.
Product Guide
USA
OneTouch Ultra Plus Flex™ meter
English
0.0
Article Details
Setting Up Your Meter:
Turn Your Meter On:
To turn your meter on, press and hold OK until the start-up test screen appears. Once the device is on, release OK. You can also turn the meter on by inserting a test strip.
Every time you turn your meter on, a start-up screen will appear for a few seconds. All segments of the display should appear briefly, indicating your meter is working properly. If the meter does not power on, check the battery.
CAUTION:
If you see any missing segments within the start-up screen, there may be a problem with the meter. Contact Customer Care.
NOTE:If you turned the meter on for the first time by inserting a test strip instead of pressing OK, you will not be able to perform a glucose test until you complete the first time setup.
First Time Setup:
To turn your meter on, press and hold OK until the start-up screen appears. Once the device is on, release OK. The meter will now automatically prompt you to set the time and date. The SET icon will appear on the screen to indicate that the meter has entered setup mode.
Setting The Time:
Hour will flash
If the hour displayed is correct, press OK to confirm.
If the hour displayed is not correct, press ↑ or ↓ to change the hour and press OK to confirm.
Minutes will flash
If the minutes displayed is correct, press OK to confirm.
If the minutes displayed is not correct, press ↑ or ↓ to change the minutes and press OK to confirm.
AM/PM will flash
If the AM/PM displayed is correct, press OK to confirm.
If the AM/PM displayed is not correct, press ↑ or ↓ to change AM/PM and press OK to confirm.
Setting The Date:
After completing the time setup, the meter will automatically move to date setup.
Year will flash
If the year displayed is correct, press OK to confirm.
If the year displayed is not correct, press ↑ or ↓ to change the year and press OK to confirm.
Month will flash
If the month displayed is correct, press OK to confirm.
• If the month displayed is not correct, press ↑ or ↓ to change the month and press OK to confirm.
Day will flash
If the day displayed is correct, press OK to confirm.
If the day displayed is not correct, press ↑ or ↓ to change the day and press OK to confirm.
NOTE:After completing first time setup, a screen with three dashes will appear. Once you begin testing, your last result will appear in place of the three dashes, along with the date and time the test was taken.
